Exposure Software Blow Up 2023

Exposure Software Blow Up


This article shows you how to download and install the full version of Exposure Software Blow Up v3.1.4.404 for free on PC. Follow the direct download link and instructions below for guidance on installing Exposure Software Blow Up v3.1.4.404 on your computer.

Table of contents

  • About the software
  • Exposure Software Blow Up v3.1.4.404 System Requirements
  • How to Download and Install Exposure Software Blow Up v3.1.4.404
  • Required files

About the software

Blow Up keeps photos crystal clear during enlargement. Especially in large prints hung on a wall, the difference between Blow Up and Photoshop is astounding. Version 3 makes pictures even sharper without computer artifacts.

If you understand Photoshop’s resize command then you already know how to use Blow Up. Our large library of standard paper sizes makes it even easier. With Lightroom and CMYK support, Blow Up fits into a professional workflow.

In Blow Up 3 we found ways to make edges even sharper without introducing computery artifacts. The images below show the difference between Blow Up 3 and the traditional bicubic photo resizer used by Photoshop and other image editors.

Blow Up’s interface is deceptively simple. Just set your paper size as you would in Photoshop and optionally set a crop region. In version 3 we kept all the rocket science under the hood. Watch our short videos or try Blow Up yourself for free to see how easy it is.

You can resize up to 300,000 pixels per side, the maximum Photoshop can handle. Of course, Photoshop would choke on a square image that big, but if you are making a billboard that Photoshop can handle, so can Blow Up!

The main features of Exposure Software Blow Up are:

  • Blow Up keeps photos crystal clear during enlargement.
  • Simplicity
  • Lightroom Support
  • Huge Images
  • Output Sharpening
  • Blow Up can handle CMYK images

Exposure Software Blow Up v3.1.4.404 System Requirements

Mac

  • macOS 10.13 High Sierra or newer
  • Apple M1 or Intel Core 2 processor or newer
  • Monitor with 1280×768 resolution or greater

Windows

  • Windows 10 or 11
  • 64-bit Windows edition
  • Intel Core 2 processor or compatible
  • Monitor with 1280×768 resolution or greater

How to Download and Install Exposure Software Blow Up v3.1.4.404

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

/0 Commenti/da

Proxima FontExpert 2023 2023

Proxima FontExpert 2023


This article shows you how to download and install the full version of Proxima FontExpert 2023 v18.0 for free on a PC. Follow the direct download link and instructions below for guidance on installing Proxima FontExpert 2023 v18.0 on your computer.

Table of contents

  • About the software
  • Proxima FontExpert 2023 v18.0 System Requirements
  • How to Download and Install Proxima FontExpert 2023 v18.0
  • Required files

About the software

FontExpert Font Manager enables you to preview and manage fonts, create Library, font groups, attach font collections, search for fonts in Library and collections, and examine your system for font errors.

FontExpert displays the list of all installed typefaces and lets you explore folders and preview uninstalled fonts located on your compact disks or DVDs, local disks, removable disks or network drives. You can preview the font as a paragraph of text or as a detailed character map. It is easy to choose the desired font size, font style or color.

FontExpert can search your local disks, remote drives, network folders for fonts, and put all fonts to a special list for your further work.

It is easy to manage any typefaces that are shown in any view of the program. You can sort, filter, preview fonts, copy, move, delete font files, activate or deactivate fonts, add or link fonts to font groups (sets). The program can control fonts located in the Windows Fonts and Psfonts folder (used by Adobe Type Manager), so you do not need to remove fonts from standard folders as some font managers require.

The main features of Proxima FontExpert 2023 are:

  • View and Preview Fonts
  • Assign Keywords, Ratings and Categories to Fonts
  • Search in Database
  • Search for Fonts on Local Discs and Network Drives
  • Search for Duplicates and Corrupted Fonts
  • Manage Fonts
  • Create Font Library
  • Print Fonts
  • View Advanced Font Properties
  • Examine your System for Font Errors
  • Export Fonts to HTML Web Album
  • Automatic Activation of Missing Fonts
  • Windows Shell Extensions

Proxima FontExpert 2023 v18.0 System Requirements

  • Operating systems (64-bit and 32-bit): Windows 11, Windows 10, 8.1, 8, 7, Vista.
  • Windows XP is supported by previous versions of FontExpert.

How to Download and Install Proxima FontExpert 2023 v18.0

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

/0 Commenti/da

FontLab 2023

FontLab


This article shows you how to download and install the full version of FontLab v8.0.0.8200 for free on PC. Follow the direct download link and instructions below for guidance on installing FontLab v8.0.0.8200 on your computer.

Table of contents

  • About the software
  • FontLab v8.0.0.8200 System Requirements
  • How to Download and Install FontLab v8.0.0.8200
  • Required files

About the software

FontLab 8 is an integrated font editor for Mac and Windows that helps you create fonts from start to finish, from a simple design to a complex project, and brings a spark of magic into type design.

With FontLab 8, you can create and edit OpenType fonts, variable fonts, color fonts and web fonts — for any Unicode writing system, from Latin, Cyrillic, Greek, Arabic, Hebrew and Indic, all the way to Chinese, Japanese, emoji, symbols and icons. Adjust spacing, kerning and hinting. Convert between font formats. Add new weights and styles to existing font families.

The main features of FontLab are:

    • TURN LETTERS INTO ART
    • MAKE WORDS LOOK GOOD
    • GIVE TEXT A VOICE
    • DRAFT & DRAW
    • EDIT & REFINE
    • CONSISTENCY & PRECISION
    • BUILD & ASSEMBLE
    • SCRIPTS & INTEGRATIONS
    • GLYPHS & FONTS

FontLab v8.0.0.8200 System Requirements

  • MAC- an Intel-based Mac computer with Mac OS X v10.10.5 (Yosemite) or later installed
  • WINDOWS-  a Windows computer with Win 7, 8 or 10 installed. If you have a 64-bit version of Windows, we recommend installing the 64-bit app. (FontLab has been seen to work on Windows XP SP2+, and Windows Vista in Compatibility Mode. But you use older operating systems at your own risk, as we do not test these configurations!)

At least 250Mb of free space on the hard disk drive is needed.

How to Download and Install FontLab v8.0.0.8200

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

/0 Commenti/da

AKVIS Frames 2023

AKVIS Frames


This article shows you how to download and install the full version of AKVIS Frames v7.1 for free on PC. Follow the direct download link and instructions below for guidance on installing AKVIS Frames v7.1 on your computer.

Table of contents

  • About the software
  • AKVIS Frames v7.1 System Requirements
  • How to Download and Install AKVIS Frames v7.1
  • Required files

About the software

AKVIS Frames is a free photo editing program designed for working with the themed frame packs by AKVIS. With the software, it’s easy to decorate your photos with exclusive ready-to-apply picture frames!

The program lets you apply ready to use frames created by artists specially for AKVIS. The frames are grouped in theme packs. Each pack contains a number of high resolution picture frames dedicated to a specific topic: four seasons sets, packs related to hobbies, special event sets like Christmas, Wedding, Valentine, Communion, Halloween… and many others!

The software will help you to quickly decorate your photos, create custom greeting cards, announcements, and invitations. You can get high quality prints or share your pictures with your friends directly from the program. Process your images with other AKVIS tools to make pencil sketches or oil paintings, and add a final touch with the Frames software. There is no limit to what you can do!

The main features of AKVIS Frames are:

    • New Favorites Tab
    • Modernized Frame Packs Manager
    •  Added Scale Frame to Fit Window option to the Preferences.
    • Added Frame Packs Manager button to the top panel.
    • Minor interface improvements.

AKVIS Frames v7.1 System Requirements

  • Operating System:Windows 7, 8, 8.1, 10, 11 – 32/64-bit   |   macOS 10.12-12.0 – 64-bit
    Minimal System Requirements: Recommended System Requirements:
    WINDOW Pentium IV, 4 Gb RAM Intel Core i5, 8 Gb RAM
    MAC  Intel, 4 Gb RAM Intel/M1, 8 Gb RAM

How to Download and Install AKVIS Frames v7.1

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

/0 Commenti/da

On-Screen Takeoff Pro 2023

On-Screen Takeoff Pro


This article shows you how to download and install the full version of On-Screen Takeoff Pro v3.98.5.57 for free on PC. Follow the direct download link and instructions below for guidance on installing On-Screen Takeoff Pro v3.98.5.57 on your computer.

Table of contents

  • About the software
  • On-Screen Takeoff Pro v3.98.5.57 System Requirements
  • How to Download and Install On-Screen Takeoff Pro v3.98.5.57
  • Required files

About the software

If you are a pro at manual takeoff, On-Screen Takeoff (OST) will seem natural to you. It’s construction estimating software that thinks the way you do, only faster. It calculates everything you need for your estimates on your computer screen with a few clicks and drags of a mouse. OST automatically saves your takeoff calculations for quick access to incoming change orders, and a headstart on your next bid.

Rework eats up to 20% of the cost of the average construction project. On-Screen Takeoff is swift and accurate and automatically saves your takeoff calculations for incoming addendums before bid day, change orders and revised specs on the job, and gives you a head start on your next bid. It gives you detailed backup on changes to scope, which helps eliminate warranty claims.

Optical Character Recognition (OCR). This feature allows you to count out objects of the same shape and size within the drawings. If you have to take off 125 studs on a wall, and you have a room with four walls, OST will auto-count the studs.

Selects takeoff objects and pastes them into a similar distance, space, and directions. This feature is a huge time-saver for ceilings, and multi-room takeoff, with the same layouts such as hotels, apartments, condos, and dorms.

The main features of On-Screen Takeoff Pro are:

  • Auto-Count Objects, Annotations, and Callouts
  • Intelligent Paste Logic
  • Multi-Condition Takeoff
  • No Paper. The point, Click, & Drag
  • Overlay
  • Style Sheets & Templates

On-Screen Takeoff Pro v3.98.5.57 System Requirements

  • Operating System RecommendedWindows® 10 Pro or Home

     

  • Operating System SupportedWindows® 8.1 Pro Windows® 7 Pro-32-Bit and 64-Bit

     

  • CPU Processor RequiredIntel-compatible 1GHz processor or faster

     

  • CPU Processors RecommendedIntel Core i5 or faster

     

  • Memory & Storage Required4 GB RAM
    1 GB Hard drive space (plus more for plans, projects)

     

  • Memory & Storage Recommended8 GB RAM or more (and 64-Bit operating system)

     

  • Display ResolutionMin. Display 1200 x 1024

     

  • Internet ConnectionRequired

How to Download and Install On-Screen Takeoff Pro v3.98.5.57

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

/0 Commenti/da

FireAlpaca SE 2023

FireAlpaca SE


This article shows you how to download and install the full version of FireAlpaca SE v2.9.1 for free on a PC. Follow the direct download link and instructions below for guidance on installing FireAlpaca SE v2.9.1 on your computer.

Table of contents

  • About the software
  • FireAlpaca SE v2.9.1 System Requirements
  • How to Download and Install FireAlpaca SE v2.9.1
  • Required files

About the software

FireAlpaca is the free Digital Painting Software that is compatible with both Mac and Windows.

FireAlpaca is the free Digital Painting Software that is available in 10 languages and compatible with both Mac and Windows. Simple tools and controls let you draw an illustration easily. New convenient tools will be added one after another! Download FireAlpaca right now!

FireAlpaca is extremely simple! No need for the tricky control at all! Highly recommended for the Digital Painting Software beginners! And of course for the advanced users as well!!

Pen, Pencil, AirBrush, and Watercolor are ready to use in the default setting. You can customize your own pen too! Crisp stroke with pen and soft edged watercolor effect are the most popular brush types.

Free Digital Painting Software for Mac users has not been very common, but FireAlpaca is available for both Mac and Windows. And a file is exchangeable between Mac and Windows. Highly recommended for Mac users as well!

The main features of FireAlpaca SE are:

  • Simple and Easy!
  • Clear&Crisp Stroke! Watercolor too!
  • Mac User Friendly too!
  • Free…FOREVER!
  • Light Performance!
  • Easy Concentration Lines and Perspective View!
  • Easy Original Brush
  • Comic Template
  • 3D Perspective

 FireAlpaca SE v2.9.1 System Requirements

  • OS: Windows 7 or Later.
  • Processor: Pentium
  • 4. Memory:
  • 2 GB RAM.
  • Storage: 100 MB available space.

How to Download and Install FireAlpaca SE v2.9.1

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

/0 Commenti/da

Topaz Gigapixel AI 2023

Topaz Gigapixel AI


This article shows you how to download and install the full version of Topaz Gigapixel AI v6.3.3 for free on a PC. Follow the direct download link and instructions below for guidance on installing Topaz Gigapixel AI v6.3.3 on your computer.

Table of contents

  • About the software
  • Topaz Gigapixel AI v6.3.3 System Requirements
  • How to Download and Install Topaz Gigapixel AI v6.3.3
  • Required files

About the software

Gigapixel AI helps you do a single thing very well: increase image resolution in a natural way. This is pretty hard to do. Most upscaling algorithms don’t know how to accurately fill in missing pixels, so you end up with blocky low-quality results.

To solve this problem, Gigapixel AI’s neural networks are continuously trained on a wide variety of sample images to understand how photorealistic detail looks. After learning from millions of images, our AI image upscaler can now believably increase resolution on a wide variety of different subjects (portraits, wildlife, landscapes, architecture, etc) and image types (DSLR, web/compressed, CG). The results are often magical. Give our intelligent image resolution enhancer a try!

Gigapixel AI can make your image appear like it was captured with a much higher-quality camera. It’s been trained on enough images of different types of subjects (like portraits, landscapes, architecture, and more) to know what photo detail should look like. This allows you to increase your photo’s resolution and quality very naturally with minimal artifacts.

Pixel count isn’t the only thing that affects image quality. Normally, if you start out with a low-quality image, you’ll just end up with a bigger low-quality image if you upscale it. Gigapixel AI upscale technology can instead create very believable and natural image detail that can often look amazing.

The main features of Topaz Gigapixel AI are:

  • Upscale image resolution instead of just enlarging pixels.
  • Improve image quality.
  • Recover natural details and textures in low-resolution faces with Face Recovery AI
  • Add image detail that looks completely natural.
  • Enhance the texture of feathers
  • Improve fur texture and sharpness
  • Higher-resolution landscapes
  • More detailed cityscapes

Topaz Gigapixel AI v6.3.3 System Requirements

  •  Operating System: Windows 11, Windows 10, Windows 8.1, Windows 7
  • Processor (CPU) Intel i3 or AMD Ryzen 3 equivalent or above (3.0 GHz and above) AVX Instructions are required.
  • System Memory (RAM) 8GB (16GB and higher is recommended for improved performance)
  • Graphics Card (GPU) OpenGL 3.3 or higher is required. Nvidia GTX 740 or AMD Radeon 5870 (higher series graphics cards recommended)
  • Dedicated Graphics Memory (VRAM) 2 GB (6GB or more for optimum performance)
  • Display (Monitor) At least 1024×768

How to Download and Install Topaz Gigapixel AI v6.3.3

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

/0 Commenti/da

TunesKit AceMovi 2023

TunesKit AceMovi


This article shows you how to download and install the full version of TunesKit AceMovi for free on PC. Follow the direct download link and instructions below for guidance on installing TunesKit AceMovi on your computer.

Table of contents

  • About the software
  • TunesKit AceMovi (v4.8.0.120) System Requirements
  • How to Download and Install TunesKit AceMovi (v4.8.0.120)
  • Required files

About the software

Easy-to-use video editing software to create and edit high-quality videos.

  • A simple yet advanced video editing software for everyone. Storytelling becomes as easy as ABC.
  • A wealth of basic editing features such as crop, split, rotate, adjust speed, etc., guaranteeing everyone grows as an editor easily.
  • Advanced features make you edit a video like a pro, and an intuitive interface saves your time and efforts. A good balance in AceMovi.

TunesKit AceMovi (v4.8.0.120) System Requirements

  • Operating System: Windows XP, Vista, 7, 8, 8.1, 10, 11 (32-bit & 64-bit)
  • Processor: 1G Hz processor, or above
  • RAM: 512MB or higher of RAM
  • Monitor: Monitor with 1024×768 pixels or higher resolution

How to Download and Install TunesKit AceMovi (v4.8.0.120)

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

/0 Commenti/da

Labeljoy Light / Basic / Full / Server 2023

Labeljoy Light / Basic / Full / Server


This article shows you how to download and install the full version of Labeljoy Light / Basic / Full / Server v6.23.01.10 for free on a PC. Follow the direct download link and instructions below for guidance on installing Labeljoy Light / Basic / Full / Server v6.23.01.10 on your computer.

Table of contents

  • About the software
  • Labeljoy Light / Basic / Full / Server v6.23.01.10 System Requirements
  • How to Download and Install Labeljoy Light / Basic / Full / Server v6.23.01.10
  • Required files

About the software

The best Label printing software to automatically generate barcodes and QR codes from any data source with a user-friendly interface!

The Best Reader for the Best Barcoding and Labeling Software

Labeljoy Reader is an application for exporting and printing your label projects. Download and use it for free forever!

generate different types of barcodes, such as Code 39, Ean13, Ean8, Ean128, ITF14, UPC, Interleaved 2/5, Codabar and many more.

The main features of Labeljoy Light / Basic / Full / Server are:

  • Quick and easy
  • Import data
  • QR code generator
  • Print labels
  • 11.000 layouts
  • User-friendly interface
  • Barcode generator
  • 4.500 high resolution cliparts

Labeljoy Light / Basic / Full / Server v6.23.01.10 System Requirements

  •  Operating System: Windows 11, Windows 10, Windows 8.1, Windows 7
  • 1000 MHz CPU
  • 128 MB RAM
  • 50 MB of free disk space
  • 800×600 screen resolution
  • Printer

How to Download and Install Labeljoy Light / Basic / Full / Server v6.23.01.10

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

/0 Commenti/da

FotoSketcher 2023

FotoSketcher


This article shows you how to download and install the full version of FotoSketcher v3.80 for free on PC. Follow the direct download link and instructions below for guidance on installing FotoSketcher v3.80 on your computer.

Table of contents

  • About the software
  • FotoSketcher v3.80 System Requirements
  • How to Download and Install FotoSketcher v3.80
  • Required files

About the software

FotoSketcher is a 100% free program for Windows (there is also an experimental version for macOS) that converts your digital photos into art automatically and in just a few mouse clicks. Over 20 different styles are available from pencil sketches to watercolor or oil paintings, pen & ink drawings, abstract art, and cartoons. From photo to painting (landscapes, architecture, portraits, etc.) in seconds!

You can also improve your original photos with simple tools (enhance contrast, sharpen, simplify image, increase luminosity, color saturation etc…) and add simple or realistic frames and text.

For advanced users, some more powerful tools allow you to batch process several images, manually retouch some areas of your pictures, combine multiple filters and even create your own effects by using the script function.

The main features of FotoSketcher are:

  • custom brushes
  • Vintage photo
  • Pen & Ink sketch
  • Pencil Sketch
  • Mixed effects
  • Abstract

FotoSketcher v3.80 System Requirements

  • Microsoft Windows XP, Vista, 7, 8, 8.1, and the latest Windows 10
  • up to MacOS 10.14 – Mojave

How to Download and Install FotoSketcher v3.80

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!
  3. Run Setup.exe and install the software

/0 Commenti/da