ANSYS Motor-CAD 2023 2023


ANSYS Motor-CAD 2023


This article will show you how to free download and install ANSYS MotorCAD 2023 vR1.1 on your PC. For instructions on how to install ANSYS MotorCAD 2023 vR1.1, please follow the link below.

Table of contents

  • About the software
  • ANSYS MotorCAD 2023 vR1.1 System requirements
  • How to Download And Install ANSYS Motor-CAD 2023 VR1.1
  • Required files


Information about the software

Ansys Motor-CAD is a dedicated electric machine design tool for fast multiphysics simulation across the full torque-speed operating range.

Motor-CAD lets design engineers evaluate topologies of motors and create designs that are optimized for efficiency, size, and performance. The four integrated modules that make up Motor-CAD software – EMag, Therm Lab Mech and Lab Mech – allow multiphysics calculations in a quick and iterative manner, allowing users the ability to go from concept to final layout quickly.

Motor-CAD users have the time and flexibility to quickly calculate and input data, which allows them to explore more motor topologies.

The main features in ANSYS MotorCAD 2023 include:

  • Intuitive, Template-Based Set Up
  • Full Operating Range Design
  • Built-in EM & Thermal Solvers
  • Thermal Sizing Machines
  • Template-based magnetic topologies
  • 2D FEA with analytic solution
  • DXF, scriptable geometries
  • CFD and FEA as well as empirical correlations
  • Template-based cooling topologies
  • Temperature-dependent Duty-Cycle
  • Multi-slice skew
  • Calculations for efficiency and loss maps


ANSYS Engine-CAD 2023 VR1.1 System Requirements

  • Operating system: Windows 11 and Windows 10; Windows 8.1 and Windows 7
  • 64-bit Intel or AMD system, running Windows 10.
  • 8GB RAM
  • A dedicated graphics card that supports OpenGL 4.5 or DirectX 11 (or higher) with the most recent drivers. Use of integrated graphics (e.g. Intel HD/IRIS) is not recommended and is not support by the Analyze stage in Discovery. Check below for any special graphics requirements to ANSYS DiscoveryLive.
  • 3 button mouse


How to Download and Install ANSYS Motor-CAD 2023 vR1.1

  1. To download the files, click on the button(s) that appears below. Depending on how fast you are downloading, it might take several minutes to an hour.
  2. Extract the downloaded files. Learn how to extract the files. QWERTY is the password for extracting.

  3. Run Setup.exe. Install the software

/0 Commenti/da

CSI SAFE 2023


CSI SAFE


This article explains how to download the full version CSI SAFE v20.3.0.2005 and install it on your own computer. To install CSI SAFE v20.3.0.2005 onto your computer, please follow the below instructions.

Table of Contents

  • About the software
  • CSI SAFE v20.3.0.2005 System Requirements
  • How to Download and Install CSI SAFE v20.3.0.2005
  • Files that are required


More information about the software

SAFE seamlessly integrates all aspects of engineering design, from framing layout to detail drawings production. SAFE delivers unmatched productivity for engineers thanks to its unique combination in power, comprehensive capabilities, ease-of-use, and efficiency.

CSI solvers have been tried and tested by the industry for over 45 years. SAPFire Analysis Engine supports multiple 64-bit solvers to optimize analysis. It can also perform both Ritz and eigen analyses. To take advantage of multiple processors, parallelization options are possible.

SAFE allows users to quickly access all aspects of modeling, analysis as well as design and reporting. You can access object properties and forms quickly with the new model explorer.

SAFE is ideal for modeling foundations, basemats, and footings. Easily model soil supports and zero tension soil models with uplift analysis. The area assignment of soil support is determined by the subgrade moduleus. They automatically adjust when the mesh changes. Basemat foundation models are available with pedestals, columns, beams or piles.

Design strips help to specify how reinforcement requirements should be calculated. SAFE can either automatically define the strips or you can create them.

CSI SAFE is characterized by the following:

  • USER INTERFACE
  • MODELING
  • STRUCTURAL COONENTS
  • LOADING
  • ANALYSIS
  • DESIGN
  • OUTPUT/DISPLAY
  • REPORTING
  • IMPORT and EXPORT


CSI SAFE v20.3.0.2005 System Prerequisites

  • Minimum Processor: Intel Pentium 4/AMD Athlon64. Recommended: Intel Athlon64, AMD AthlonX4/Ryzen, and Intel i5/i7. A 64bit CPU is required. SAPFire(r), an analytical engine, includes multithreaded solvers, algorithms, and programs that can take full advantage of multicore CPUs. The design algorithms can also utilize multiple cores.
  • Operating System Windows(r) Windows8.1, 10, or 11 64bit processor
  • Minimum Video Card: Supports 1024×768 resolution with 16 bits colors in standard (GDI+). Recommended Discrete Video Card: NVIDIA GPU or an equivalent, and dedicated graphics RAM (512Mb and larger) to support DirectX graphics mode. The card must be DirectX 11 Compatible. DirectX graphics mode fully utilizes the hardware acceleration provided by a GPU and dedicated graphics RAM. For better graphics quality in terms of anti-aliasing and line thickness, the device raster drawing capabilities should support legacy depth bias.
  • Memory Minimum: 8 GB RAM The problem size that can be solved and the speeds for solution & response recovery increase considerably with more RAM.
  • Disk Space 6GB is required to install the program. External and network drives should not be used.


Downloading and installing CSI SAFE v20.3.0.2005

  1. You can click on the below download button to start downloading the files. This may take anywhere from a few seconds to several hours depending on how fast you are downloading the files.
  2. Extract the downloaded files. See this article if you are unsure how to extract. QWERTY will always be the password to extract.

  3. Start Setup.exe to install the software

/0 Commenti/da

AnyLogic Professional (v7.0.2) 2023


AnyLogic Professional (v7.0.2)


This article will explain how to download the full version and install it on your PC. Follow the steps and download link to install AnyLogic Professional.

Table of contents

  • Software
  • AnyLogic Professional System Needs
  • How to download and install AnyLogic Professional
  • Required files


More information about the software

AnyLogic is the single platform you need to model dynamically for your business. You don’t need to look for workarounds. No matter how complicated your system may be, AnyLogic has the right tools to make it easy, natural, and manageable. In a visual drag and drop environment, you can simulate any business process or product, including logistics and manufacturing, as well as social change and marketing campaigns.

AnyLogic Professional features the following:

  • Multimethod modeling environment
  • Animation and visualization
  • Library specific to an industry
  • Simulation software that is professional and agent-based
  • Integration of GIS maps
  • Simulation in the cloud
  • Rich experiment framework
  • Data interoperability
  • Model export and model integration
  • Model building support
  • Flexible and customizable platform


AnyLogic Professional System Requirements

  • Microsoft Windows 10, x64, Internet Explorer 11
  • AnyLogic installation requires 1.5GB of free disk space.
  • We recommend that you have 4-8GB memory and at least 2 cores of a modern processor for maximum performance. This is because more cores can be used to benefit pedestrian modeling, and to run multiple runs.
  • Touchpad is more convenient for graphic editing than the mouse.


How can I download and install AnyLogic Professional

  1. To download the files, click on the button(s) that appears below. Depending on your download speed, this may take a few minutes or several hours.
  2. Extract the downloaded files. For more information on extracting, please refer to this article. The password to extract will always be: www.mysoftwarefree.com
  3. Run anylogic-professional-7.0.2.x86_64.exe (for x64) or anylogic-professional-7.0.2.exe (for x86) and install the software
  4. Open Creack Folder:

-Copy “tl.jar” to: C:\Program Files\AnyLogic 7 Professional\plugins\com.xj.anylogic.truelicense_7.0.2.201404181546 -Copy “com.xj.anylogic.ui.jar” to: C:\Program Files\AnyLogic 7 Professional\plugins\com.xj.anylogic.ui_7.0.2.201404181546 -Click Help->Activate Product and then choose “Enter the Permanent Key that you received by e-mail” and register with the serial from Serial.txt

  • You now have the full version of AnyLogic Professional v7.0.2 installed on your PC.

/0 Commenti/da

Capturing Reality RealityCapture 2023


Capturing Reality RealityCapture


This article will show you how to free download and install Capturing Reality Reality RealityCapture V1.0.3.4987 on your PC. To install Capturing Reality Reality RealityCapture V1.0.3.4987 on your PC, please follow the instructions and download link.

Table of Contents

  • About the software
  • RealityCapture v1.0.3.4987 System Requirements
  • How to Download and Install Capturing Reality Reality RealityCapture V1.0.3.4987
  • Files required


The software

Photogrammetry software for Windows allows you to create 3D models out of a collection of images or laser scans.

RealityCapture is the state-of-the-art photogrammetry software solution that is changing the industry. It is the most efficient solution on market right now, which improves productivity and allows you more time to work on your target areas.

Completely automate the creation of virtual reality scenes, textured meshes in 3D, orthographic projections, and geo-referenced mapping from images and/or Laser scans.

RealityCapture can automatically create virtual reality scenes from images and/or laser scanning.

Capturing Reality RealityCapture features the main points of their work are:

  • Video/Photos Imported
  • Laser Scans can be imported
  • Laser scans and photos can be combined to create a new photo.
  • Triangular watertight meshes
  • Importing custom meshes and UVmaps
  • Coloring/Texturing
  • Maps of Normal and Displacement
  • Re-projecting textures of high poly to low model
  • Control points and geo-referencing
  • Automatic markers detection
  • Ortho-projections/Mapping
  • Generation of DSM/DTM
  • Distance, Area and Volume Measurements
  • Command Line Interface


Reality Capture v1.0.3.4987 System requirements

  • 64bit computer with at least 8GB RAM
  • 64bit Microsoft Windows Version 7 / 8/ 8.1/ 10/ 11 or Windows Server Version 2008+
  • NVIDIA graphicscard with CUDA3.0+ abilities and 1GB VRAM
  • CUDA Toolkit 10.2, minimal driver version 441.22.


How To Download and Install Capturing Reality Reality RealityCapture.

  1. To download the files, click on the button(s) that appears below. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. This article will help you learn how to extract. QWERTY is always the password to extract!

  3. Run Setup.exe then install the program

/0 Commenti/da

Rhinoceros 3D 2023


Rhinoceros 3D


This article will show you how to free download and install Rhinoceros3D (v7.16.22067.13001) on your PC. For instructions on how to install Rhinoceros (3D) (v7.16.22067.13001), follow the link below.

Table of contents

  • About the software
  • Rhinoceros 3D (v7.16.22067.13001) System Requirements
  • How to Download and Install Rhinoceros 3D (v7.16.22067.13001)
  • Files required


More information about the software

Rhino is capable of creating, editing, analysing, documenting, rendering, animating, and translating NURBS curves. There are no limits on complexity, degree, or size beyond those of your hardware.


Other special features:

  • Free-form, unrestricted 3D modeling tools that are not restricted by price. Any shape you can think of.
  • You need to be able to design, build, engineer, analyze and manufacture everything from jewelry to an airplane.
  • All other design, drafting and CAM software compatible with it.
  • Read and repair IGES files.
  • Accessible. It is so easy to use and learn that you can concentrate on design and visualization instead of being distracted by the software.
  • Even on a regular laptop computer, it runs fast. No special hardware is required.
  • Platform to develop hundreds of 3D-printed specialty products.
  • Affordable. Ordinary hardware. A short learning curve. Affordable purchase price. No maintenance charges


Rhinoceros 3D (v7.16.22067.13001) System Requirements

  • Windows 11, 10 or 8.1.
  • Windows VDI – Virtual Desktop Infrastructure
  • 64-bit Intel/AMD processors (Not for ARM)
  • 8 GB of RAM or more is recommended.
  • 600 MB disk space.
  • OpenGL 4.1 is supported by recommended video cards
  • Recommended RAM: 4GB or More


How To Download and Install Rhinoceros 3D

  1. Click on the download button(s) below and finish downloading the required files. Depending on your download speed, this may take a few minutes or several hours.
  2. Extract the downloaded files. See this article if you are unsure how to extract. QWERTY will always be the password to extract.

  3. Run Setup.exe then install the program

/0 Commenti/da

Pepakura Designer 2023


Pepakura Designer


This article shows how to install Pepakura v5.0.6 full-featured on a PC. Follow the direct download link and instructions below for guidance on installing Pepakura Designer v5.0.6 on your computer.

Table of contents

  • About the software
  • Pepakura Designer v5.0.6 System Requirements
  • How to download and install Pepakura Designer v5.0.6
  • Required files


About software

Pepakura designer is a Windows program that creates unfolded designs from 3D data.

Pepakura Designer features to automatically unfold 3D polygon-mesh models and allows you to edit them.

Pepakura Designer allows the creation of real paper craft models from digital information!

Pepakura Designer is available for free. (The license keycode activates the data exporting feature.

Pepakura Creator does not provide 3D design features. Pepakura Designer supports the most common 3DCG file formats.

Metasequoia 3DCG software is highly recommended. You can use it free of cost for 3D model designing. Pepakura Designer supports Metasequoia files.

Pepakura Designer has the following main features:

  • One Button Unfolding
  • Useful Toolset for Layout Editing
  • Assemble Assistance
  • Exporting
  • Texture Setting


Pepakura Designer v5.0.6 System Requirements

  • Operating System: Runs on Windows 8/10/11(64bit)


Downloading and installing Pepakura designer v5.0.6

  1. You can click on the below download button to start downloading the files. Depending on your download speed, this may take a few minutes or several hours.
  2. Extract the downloaded files. This article will help you learn how to extract. QWERTY is always the password to extract!

  3. Run Setup.exe. Install the software

/0 Commenti/da

Altium Designer 2023


Altium Designer


This article shows you how to download and install the full version of Altium Designer (v22.4.2 Build 48) for free on PC. For assistance in installing Altium Designer v22.4.2 Build48 on your PC, follow these instructions.

Table of Contents

  • Software
  • Altium Designer (v22.4.2Build 48) System Requirements
  • How to Download & Install Altium Designer (v22.4.2Build 48)
  • Required files


About the software

Altium offers a variety of services, from aerospace and automotive to consumer electronics to medical devices and personal computers.

Altium Designer gives engineers an integrated design environment. It allows them to have a single view for every stage of the PCB design process. Engineers can easily access all design tools at once and create high-quality products in a quick, intuitive environment.


Altium Creator (v22.4.2Build48) System Requirements

  • Windows 10 (64–bit only) or Windows 8 (64–bit only), Windows 7 SP1 (64–bit only), is still supported, but not recommended.
  • Intel Core i5 processor (or equivalent)
  • 4GB RAM
  • 10GB hard disk space (Install + User Files)
  • Graphics card that supports DirectX 10 or higher, such as GeForce 200 series/Radeon HD5000 series/Intel HD4600
  • Monitor with at least 1680×1050 (widescreen) or 1600×1200 (4:3) screen resolution
  • Adobe Reader (version XI or later for 3D PDF viewing)
  • Up to date Web browser


How do I download and install Altium Designer? (v22.4.2 Build 48).

  1. Once you have finished downloading the files required, click the download button. Depending on your download speed, this may take a few minutes or several hours.
  2. Extract the downloaded files. This article will help you learn how to extract. QWERTY will always be the password to extract.

  3. Run Setup.exe and install the software

/0 Commenti/da

SOFiSTiK 2023 SP 2023-2 Build 558 2023


SOFiSTiK 2023 SP 2023-2 Build 558


This article shows how to install the full version SOFiSTiK 2023-2 Build 558 free of charge on your computer. You can follow the instructions and download link below to install SOFiSTiK2023 SP 2023-2 Building 558 on your PC.

Table of contents

  • Software
  • SOFiSTiK 2023-2 SP 2023-2 Building 558 System Requirements
  • How to Download & Install SOFiSTiK 223 SP 2023-2 Build 558
  • Required files


About software

SOFiSTiK This allows for seamless project planning, from modeling to reinforcement. It also offers the possibility to save time and improve quality through lower error rates. New model interfaces have been improved to make it easy to implement efficient BIM workflows. Users can concentrate on the things that matter.


Improve your efficiency with seamless planning

SOFiSTiK SOFiSTiK’s powerful software toolset has been upgraded to allow seamless, efficient BIM design. It also includes new interfaces like SAF and optimized methods to integrate IFC models into projects.

New tasks for earthquake calculation are now available, with special story checks using the widely accepted response spectrum method. The new tasks integrate smoothly in between upstream modeling and subsequent steps for calculation and analysis. Information on the building response in the case of seismic events is generated based on the story levels that have been defined during system definition and can then be used for further design steps. In addition to high-performance eigenmode analysis of large systems and targeted mode filtering for individual modes, the novel underlying FE technology permits optional stiffness reductions for structural members.

The SOFiSTiK reinforcement package has been updated to include the BIM apps Reinforcement Detailing, (RCD), and Reinforcement Generation. This allows for greater adaptability and support for international planning standard. The apps can now be integrated seamlessly into the building construction workflow and allow for the creation of reinforcement plans using the Autodesk global standard. As a reliable base for traditional 2d design, SOFiCAD 2DCAD software rounds out the building design workflow.


SOFiSTiK2023 SP 2023-2 Building 558 System Requirements

  • Operating System: Windows XP/Vista/7/8/8.1/10
  • RAM: 2GB
  • Hard Disk 500 MB
  • Processor: Intel Dual Core (or higher) processor


Downloading and installing SOFiSTiK 2023 SP2023-2 Build 558

  1. To download the files, click on the button(s) that appears below. This may take anywhere from a few seconds to several hours depending on how fast your download speed is.
  2. Extract the downloaded files. This article will help you learn how to extract. The password to extract will always be: QWERTY!

  3. Run Setup.exe, and then install the software

/0 Commenti/da

Artlantis 2023 2023


Artlantis 2023


This article shows how to get the full version Artlantis 2023 V9.5.2.32351 absolutely free for your PC. For instructions on how to install Artlantis 2023 (v9.5.2.32351) on your computer, follow the link below.

Table of Contents

  • About the software
  • Artlantis 2023 v9.5.2.32351 System Requirements
  • How to Download Artlantis2023 v9.5.2.32351
  • Required files


About the software

Artlantis is a pioneer in architectural visualization. Compatible with all 3D modeling software available, Artlantis can create photorealistic renderings as well as animations.

Artlantis supports almost all 3D models currently available, including DXF, DWG and OBJ formats. This IFC import capability allows the user to receive a rich BIM data scene from a colleague using another modeler and to make any structural modifications to it in his daily work tool.


The plug-ins specifically for Archicad (Rhinoceros), Vectorworks, Autodesk Revit and SketchUp allow exports to Artlantis.

The main features of Artlantis 2023 are:

    • Clearer, more readable interface
    • Navigation is faster
    • Faster and simpler media search (tag system)
    • AbventID accounts allow direct access to the internet via a single account
    • Easy Interface
    • LUTs
    • IFC Import


Artlantis 2023 v9.5.2.32351 System Requirements

  • Required:Intel Core i7 (or 4+ CoreRAM): 16 GB system for macOS Mojave 10.14, Windows 10Compatible macOS Catalina (10.55) & macOS Big Sur (11)Graphic Cards: 2GB managing OpenGL

  • Minimal:Intel(r), i3 4Core @2GHzRAM 8 GB system: macOS High Sierra 10.13, Windows 8Graphic Cards: 1GB*, OpenGLDisplay 1280×800 pixels internet access


How To Download and Install Artlantis 2023 V9.5.2.32351

  1. After clicking the download button(s), you can finish downloading the required files. Depending on how fast you are downloading, it might take several minutes to an hour.
  2. Extract the downloaded files. This article will help you learn how to extract. QWERTY, the password to extract, will always work!

  3. Run Setup.exe then install the program

/0 Commenti/da

IDEA StatiCa 2023


IDEA StatiCa


This article shows how to install IDEA statiCa v21.1.4.1568 free on your computer. Follow these instructions to install IDEA StatiCa.v21.1.4.1568.

Table of contents

  • About the software
  • IDEA StatiCa.v21.1.4.1568 Requirements
  • How to Download and Install IDEA StatiCa v21.1.4.1568
  • Required files


About the software

IDEA StatiCa – The world’s leading solution for the structural design, of concrete details, and critical components, of steel connections and concrete details.

Every steel project starts with connection design. So, stop making compromises. IDEA StatiCa is a software that allows you to design steel connections. It can handle bolted connections, weld connections, shear and moment connections and many other details.

Concrete design is complex. Don’t rely on simple tools that only have a small number of ULS or SLS checks for concrete projects. IDEA StatiCa allows you to analyze and design all concrete details and members. You can model, optimize reinforcement and receive a report with all of the code-checks.

Enjoy this exclusive end of year loyalty deal to make your projects more successful.

IDEA StatiCa offers critical structural design capabilities to every project. It also links with CAE/CAD software packages to import and export data for all project stakeholders, no matter if they are in-house or outsourced. This minimizes mistakes and repetitive work.

The main features of IDEA StatiCa are:

  • SAFETY FIRST
  • SAVE TIME
  • DESIGN CONFIDENCE
  • LEVERAGE BIM
  • Predefined templates for simple ones, visual modeling for the complex.
  • Comprehensive reports.
  • Automated BIM Links with your FEA/CAD Software


IDEA StatiCa. V21.1.4.1568 Systems Requirements

  • Operating systemMinimum Windows 8.1, Windows 10 64 bit (necessary in order to update Windows 8.1 or to install Visual C++ Retributable Package).

    Recommendation Windows 11, 64 bit

  • FrameworkMinimum : Microsoft net Framework 4.8
  • Graphics cardMinimum: Windows True Color display adapter with 1024×768 resolution

    Recommendation: Single OpenGL 4.2 compatible graphics card with 8 GB RAM, up to 2560 x 1600 resolution

  • ProcessorMinimum: Intel Pentium 4 or AMD Athlon 64

    Recommendation: Intel Core i7 or Core i5 processor and compatible

  • RAMMinimum 4 GB

    Recommendation – 8 GB

  • Hard diskInstallation space: 0.7 GB


How to download and install IDEA StatiCa.

  1. Click on the download button(s) below and finish downloading the required files. Depending on how fast you are downloading, it might take several minutes to an hour.
  2. Extract the files. Learn how to extract the files. QWERTY is the password for extracting.

  3. Run Setup.exe then install the program

/0 Commenti/da